|
Integrated Control Systems engineers have been designing and manufacturing products for the petroleum equipment industry for over two decades. Our combined experience includes: Intrinsically safe products (pulsers), Service Station Consoles, Fuel Management Systems (Card Systems), Electronic Dispensers, PC Software, and many other products for specific petroleum applications.
CLICK HERE TO VIEW ENTIRE ICS CATALOG
|
| CLICK PHOTO FOR WEB PAGE |
|
|
The SP1 Smart Pulser was designed to fit any Veeder-Root computer, so stocking multiple pulser models is unnecessary. The SP1 was designed to be very durable, and contains special circuitry which makes is more accurate than any other pulser on the market.
Precision formed aluminum housing. (No plastic!)
Machined aluminum coupling shaft. (No more breakage!)
Stainless Steel encoder wheel is impervious to the elements.
Dual bearing construction promotes long pulser life.
Microprocessor controlled direction sensing eliminates over counts due to pump vibration or meter backlash.
Configuration setting made in pulser head for easy access.
Intrinsically safe circuitry, no conduit required!
Environmentally coated circuitry eliminates moisture problems.
Heavily filtered power supply eliminates noise problems.
Extended temperature operation. (-40 to 150 degrees F)
Compatible with ALL Veeder Root mechanical computers (101, 2001, 2002, 2002E, VR-10, VR-10/4) for money or gallons.
Small size allows mounting where other pulsers cannot.
12VDC and 120VAC models available.
Dual output model available.
2 year warranty
CLICK HERE TO VIEW THE SP1 PULSER PRODUCT SHEET
|
|
| CLICK PHOTO FOR WEB PAGE |
|
|
The MR1 Pulser was designed to fit all FillRite meter-resgisters, as well as the
Dresser Wayne 700R meter-register. The MR1 contains a digital pulse filter, which
eliminates overcounting due to vibration.
10 pulses per gallon output, no configuration required.
Digital pulse filtering eliminates overcounts.
Simple bolt on installation.
Intrinsically safe circuitry, no conduit required!
Environmentally coated circuitry eliminates moisture problems.
Heavily filtered power supply eliminates noise problems.
Extended temperature operation. (-40 to 150 degrees F)
12VDC and 120VAC models available.
Dual output model available.
2 year warranty
CLICK HERE TO VIEW THE MR1 PULSER PRODUCT PAGE
|
|
| CLICK PHOTO FOR WEB PAGE |
|
|
The GB1 Pulser was designed to fit the Gasboy meter-registers that have a pushbutton style reset. The GB1 contains a digital pulse filter, which eliminates overcounting due to vibration.
Fits Gasboy meter-registers with pushbutton style reset.
10 pulses per gallon output, no configuration required.
Digital pulse filtering eliminates overcounts.
Simple bolt on installation.
Intrinsically safe circuitry, no conduit required!
Environmentally coated circuitry eliminates moisture problems.
Heavily filtered power supply eliminates noise problems.
Extended temperature operation. (-40 to 150 degrees F)
12VDC and 120VAC models available.
Dual output model available.
2 year warranty
CLICK HERE TO VIEW GB1 PULSER PRODUCT PAGE
|
|
| CLICK PHOTO FOR WEB PAGE |
|
|
The GPI1 Pulser was designed to fit the new FM-530 or new style MD-130 meter-registers. The GPI1 contains a digital pulse filter, which eliminates overcounting due to vibration.
Fits GPI meter-registers using the MD-130(New style) or FM-530 register.
10 pulses per gallon output, no configuration required.
Digital pulse filtering eliminates overcounts.
Simple bolt on installation.
Intrinsically safe circuitry, no conduit required!
Environmentally coated circuitry eliminates moisture problems.
Heavily filtered power supply eliminates noise problems.
Extended temperature operation. (-40 to 150 degrees F)
12VDC and 120VAC models available.
Dual output model available.
2 year warranty
CLICK HERE TO VIEW GPI1 PULSER PRODUCT SHEET
|
|
| CLICK PHOTO FOR WEB PAGE |
|
|
The VR1 Pulser was designed to fit the Veeder Root© model 7886 or 7887 meter-registers. It contains the same direction sensing technology as our SP1 pulser, which eliminates pulse errors due to vibration or meter backlash. The VR1 pulser brings electronic pump accuracy to commercial fueling.
Fits both 7886 and 7887 meter-registers.
Fits inside existing meter-register cabinet for easy installation.
Generates either 1, 10, or 100 pulses per gallon.
Dual bearing construction promotes long pulser life.
Microprocessor controlled direction sensing eliminates over counts due to pump vibration or meter backlash.
Up to 2500 gallons/minute on 7886 and 250 gallons/minute on 7887.
Configuration setting made in pulser head for easy access.
Intrinsically safe circuitry, no conduit required!
Environmentally coated circuitry eliminates moisture problems.
Heavily filtered power supply eliminates noise problems.
Extended temperature operation. (-40 to 150 degrees F)
Stainless Steel encoder wheel is impervious to the elements.
Small size allows mounting where other pulsers cannot.
12VDC and 120VAC models available.
Dual output model available.
2 year warranty
CLICK HERE TO VIEW VR1 PULSER PRODUCT PAGE
|
|
| CLICK HERE TO VIEW WEB PAGE |
|
|
Petroleum electronics like Card Systems, Tank Monitoring Systems, and Consoles
have unique power problems. Long runs of field wiring, connection with inductive
loads, and noisy power sources contribute to problems with equipment. The SS1
Surge Suppressor was designed specifically for petroleum equipment applications. It
contains 7 stages of surge suppression and power line filtering to block spikes and
only allow smooth continuous power to the equipment.
CLICK HERE TO VIEW SS1 PRODUCT SHEET
|
|
| CLICK PHOTO FOR WEB PAGE |
|
ES1 Emergency Pump Stop Switch
|
An emergency stop switch is required by electrical code to shut off all fueling operations in the event of an emergency
The ES1 switch is designed to fulfill the NFPA code requirements. It uses a heavy cast aluminum, weather sealed, NEMA 4X enclosure with stainless steel hardware. The switch is a large (40mm) red, single or double pole, 10 amp normally closed unit. The ES1 has a highly visible, bright yellow sign on the front panel for easy identification in an emergency. All components of the ES1 are UL listed.
CLICK HERE FOR ES1 PRODUCT SHEET
|
|
| CLICK PHOTO FOR WEB PAGE |
|
Phoenix System LinkTag Upgrade
|
Tired of replacing Durakey sockets and worn out mag cards? ICS has the solution! Introducing the new LinkTag system! LinkTags are the next-generation technology for identification devices. They operate by transmitting short-range magnetic pulses, so they have no batteries, contacts or magnetic strips to wear out. ICS Has everything you need to upgrade your Phoenix system and eliminate the hassle of unreliable cards and keys.
DURABLE - LinkTags contain solid state digital circuitry and a short-range antenna sealed in a plastic housing. They are impervious to moisture, magnetism, impact, and outdoor temperatures.
RELIABLE - LinkTags have an infinite number of read cycles. Since there are no contacts to wear out or batteries to die, they are more reliable than any previous technology!
REUSABLE - LinkTags can be reprogrammed thousands of times and are guaranteed to retain the programmed data for 10 years.
CONVENIENT - LinkTags are available in a keyfob style for use on a vehicle key ring, or card style for use as an employee badge or wallet card. Other styles are available for custom applications. ICS can also custom print the card style LinkTags with your company name and address for no extra charge.
SECURE - LinkTags use encryption technology to keep the programmed data secure. Each tag is programmed by ICS with a secure key known only to ICS LinkTag reader and programmer modules.
SUPPORT - The LinkTag system is fully supported and warranted by ICS.
CLICK HERE TO VIEW LinkTag PRODUCT SHEET
|
|
| CLICK PHOTO FOR WEB PAGE |
|
|
A specialized troubleshooting tool for the petroleum service technician. The Pulse Analyzer saves time and trouble by quickly and accurately finding the cause of a pulser problem with a console or card system.
The PA1 Pulse Analyzer can quickly determine the cause of a pulser problem. It can check the output of most pulsers either stand-alone or in-circuit with a console or card system. It can also generate a pulse output for testing a console or card system?s input circuitry.
The Pulse Analyzer uses a sturdy watertight enclosure for extra durability. Test leads are included and store inside the case when not in use. There is even an automatic shutoff feature to save battery power. The ICS Pulse Analyzer will be a valuable troubleshooting tool for the service technician.
CLICK HERE TO PA1 Pulser Analyzer PAGE
|
|
