
|

|
Piping & Containment Systems
FlexWorks, by OPW Fueling Containment Systems,
the world's leading manufacturer of petroleum handling equipment, is a completely integrated underground fuel transfer and
containment system. Designed to provide the highest level of dispensing performance, installation efficiency and containment
protection, FlexWorks delivers cost-effective peace of mind for UST operators. The FlexWorks system solution consists of highly
engineered components that are designed to operate in unison to ensure long-term system integrity and performance. Additionally,
FlexWorks offers a high degree of flexibility to meet virtually any underground piping requirement.
|

|
CLICK PHOTO FOR WEBPAGE |

|
Double
Wall Supply Piping
|
OPW Fueling Containment Systems
FlexWorks flexible piping utilizes fully bonded, premium PVDF construction throughout to offer complete peace-of-mind
protection, performance, installation ease and advantages over rigid and semi-rigid pipe.
|
CLICK PHOTO FOR WEB PAGE |

|
FlexWorks
Lined Access Pipe
|
A diameter corrugated flexible conduit
used to provide access to, and permit the future replacement of, the Flex piping, if desired. This corrugated pipe is strong
enough to withstand H-20 loading requirements when properly buried and thick enough to minimize damage from shipping and jobsite
handling. Access pipe can accommodate the 3/4", 1", 1-1/2", 2" and 3" FlexWorks supply
|
CLICK PHOTO FOR WEB PAGE |

|
|
Polyethylene Tanks Sumps w/
Mechanically Fastened CoversOPW-FCS one piece polyethylene tank umps
are listed with Underwriters Laboratories, Inc., (UL), and have passed the requirements for Canada at Underwriters Laboratories
of Canada (ULC), KIWA and IP
|
CLICK PHOTO FOR WEB PAGE |

|
Injection
Molded Fiberglass (FRP) Tank Sumps
|
OPW Fueling Containment System
tank sumps function as a liquid tight isolation container providing secondary containment for the tank fittings, valves, pumps
and FlexWorks pipe fittings. They also provide surface access to the tank itself, as well as a clean, dry environment for
future service and maintenance. All tank sump models have height adjustable risers to accommodate different tank burial depths.
Each sump model has its own specific range of height adjustability, and is fabricated and assembled at the job site.
|
CLICK PHOTO FOR WEB PAGE |

|
One-Piece
Polyethylene Dispenser Sumps
|
FlexWorks Dispenser Sumps are installed beneath fuel dispensers to provide access
to and secondary containment of dispenser plumbing, emergency shear valves, and underground piping connections.
|
CLICK PHOTO FOR WEB PAGE |

|
Fiberglass
Dispenser Sumps
|
FlexWorks Fiberglass dispenser sumps allow the supply piping to enter and/or exit out of
the sidewall of the containment sump at a very low elevation. Ideal for pressure piping systems requiring indirect slope back
to the tank.
|
CLICK PHOTO FOR WEB PAGE |

|
Tank
Sump mounting flange
|
FlexWorks Tank Sump mounting flanges are used to mount FlexWorks tank sumps
to 4" and 6" underground storage tank bung fittings. Flange Top models (SMF-6) provide added flexibility in positioning of
pump or extractor outlets. First, the riser or extractor is threaded into the top flange. The top flange is then oriented
and bolted to the mounting flange.
|
CLICK PHOTO FOR WEB PAGE |

|
Double-Wall Swivel Pipe Couplings
|
Double Wall Swivel Pipe Couplings are a proven coupling and fitting system designed exclusively for use with FlexWorks
Piping. Double Wall Swivel couplings and fittings are of a double wall design and are used to interconnect FlexWorks flexible
piping.
|
CLICK PHOTO FOR WEB PAGE |

|
SBC Swivel Bolt-On
Double Wall Pipe Coupling.
|
The new patent pending technology
gives users the same great features as our revolutionary DPC swage on double wall fittings in a Bolt-on design. The SBC eliminates
the need to trim back the secondary jacket—and eliminates the need for rubber test boots!
|
CLICK PHOT FOR WEB PAGE |

|
|
Coaxial System Fittings *for
Double Wall Primary Pipe
(For 1.5" and
2" Only)
A double wall coupling that is
used to connect double wall FlexWorks pipe or Marina pipe to coax fittings and adaptors. Couplings are attached
to the piping using the OPW Fueling Containment Systems Coupling Machine with the coax coupling swage kit.
|
CLICK PHOTO FOR WEB PAGE |

|
|
OPW Fueling Containment
System Barbed Fittings are a single wall design and are used to connect Flex or Vent piping. This piping connection
system does not require the use of pipe couplings or the OPW Fueling Containment Systems coupling machine.
|

Swivel Elbow Coupling (SEF Model)
|

Double Wall Pipe Coupling (DPC Model)
|

Swivel Pipe Coupling (SPC Model)
|

Swivel Tee Fitting (STF Model)
|
CLICK PHOTO FOR WEB PAGE |

|
|
CLICK PHOTO FOR WEB PAGE |

|
Electronic
coupling machine
|
CLICK PHOTO FOR WEB PAGE |

|
Pipe
cutter/ Jacket stripper
|
CLICK PHOTO FOR WEB PAGE |

|
|
CLICK ON PHOTO FOR WEB PAGE |

|
Pneumatic
Coupling Machine
|
CLICK PHOTO FOR WEB PAGE |

|
Fishing
Bull Nose
|