opw.jpg

CLICK HERE TO VIEW/ DOWNLOAD COMPLETE OPW CATALOG

VAPOR ADAPTORS

1611AV-1620            3” X 4” (ALUMINUM)

61VSA-1020-EVR    4” SWIVEL (BRASS)

H04150     REPLACEMENT GASKET FOR 1611AV-1620

H09039M REPLACEMENT GASKET FOR 61VSA-1020EVR

CLICK PHOTO FOR WEB PAGE
61vsa1.jpg

61VSA
Vapor Swivel Adaptor
 

Stage I Vapor Recovery Adaptors are installed in spill containment manholes on the vapor recovery riser pipe from an underground gasoline storage tank. They mate with the vapor recovery elbow on the delivery transport truck when recovery of gasoline vapors is required.

The OPW 61VSA Vapor Swivel Adaptor is a poppeted adaptor, designed to mate with a vapor recovery elbow, featuring a top section that rotates with hose movement while the bottom section remains securely sealed to the 4-inch tank riser. The 61VSA is rated at 10 psi maximum working pressure.

CLICK HERE TO VIEW 61VSA CATALOG PAGE

61sa-tool.jpg

61SA-Tool

The 61SA-TOOL is a wrench designed to thread on the 61SA Fill and 61VSA Vapor Adaptors. The OPW 61SA-TOOL Adaptor installation tool is required to insure proper installation of OPW rotatable swivel adaptors, thread-on spill containers, fill and vapor adaptors, TC-400 torque cap for pipe nipples and threaded riser adaptors as per EVR requirements. The 61SA-TOOL includes provisions for the use of a torque wrench to facilitate accurate installation and testing.

CLICK PHOTO FOR WEB PAGE
1611av-1620.jpg

1611 Series
Vapor Recovery Adaptors

The OPW 1611AV and 1611AVB are poppeted adaptors, designed to mate with a vapor recovery elbow, for returning gasoline vapor to the tank truck during a fuel delivery to an underground tank. The 1611 Series is rated at 10 psi maximum working pressure.
 
OPW 1611VR Slide Sleeve
OPW 1611VR Adaptor is used when manifolding vent lines above ground. When the vapor recovery elbow is attached, a sliding valve within the adaptor closes off the normal breathing vent lines and diverts the vapor into the tank truck via the vapor return hose. Available in 3" size for use with 2" vent line.

CLICK HERE TO VIEW 1611 CATALOG PAGE

CAPS

1711T-7085-EVR       3” (ORANGE)

1711LPC-0300                       3” (ORANGE) LOW PROFILE

H10886M REPLACEMENT GASKET FOR 1711T-7085-EVR

H15005M REPLACEMENT GASKET FOR 1711LPC-03600

CLICK PHOTO FOR WEB PAGE
1711t-7085-evr.jpg

1711T
Vapor Recovery Cap

The OPW 1711T Vapor Recovery Cap is for use with the OPW 1611AV, 61VSA, 1611AVB and 1611VR Adaptors. The 1711T is installed on the vapor recovery adaptor, when not in use, to prevent vapors from escaping and to prevent water, dust and debris from entering the tank. Constructed of Duratuff® to help prevent corrosion, the OPW 1711T will couple to Civacon/OPW 4" Kamloks, and features a center post that allows an even distribution of force when coupling to the adaptor. The 1711T can be locked with a padlock.

CLICK HERE TO VIEW 1711T CATALOG PAGE

CLICK PHOTO FOR WEB PAGE
1711lpc.jpg

1711LPC
Low Profile Vapor Cap

The OPW 1711LPC low profile top seal vapor cap is designed for tight installations where the clearance between the top of the vapor adaptor and the underside of the spill container or manhole cover is limited.  The rugged iron lever provides a positive cam-action that seats the cap firmly in the adaptor groove for a water and vapor tight seal.  When engaged, the lockable cap adds only 1/2" to the final height of the adaptor.  The cap is powder coated API Orange to signify vapor recovery. The 1711LPC can be used with the OPW 3" 1611AV, 1611AVB and 61VSA series vapor adaptors.

CLICK HERE TO VIEW 1711LPC CATALOG PAGE

ebw.gif

VAPOR ADAPTORS

300-210-01         4”  (ALUMINUM)

SWV-101-B    4” SWIVEL  (BRASS)

770-201-03 REPLACEMENT GASKET FOR 300-210-01

85039           REPLACEMENT GASKET FOR SWV-101-B  

CLICK PHOTI FOR WEB PAGE
0300vapor.jpg

Model 300
Vapor Check Valve Adapter

The vapor check valve adapter permits coupling to the vapor return line from the underground tank in dual point systems. The poppet design seals off the vapor path when not coupled.

CLICK PHOTO FOR WEB PAGE
swv-101.jpg

Model SWV-101-B
Vapor Swivel Adapter

The vapor swivel adapter helps prevent vapor leaks caused by constant elbow movement on the vapor riser pipe. The top section rotates during normal deliveries preventing the bottom section from loosening on the vapor riser causing a vapor leak around the adapter. The poppet design seals off the vapor path when not coupled.

CLICK PHOTO FOR WEB PAGE
0306_1_thumb.jpg

Model 306
Coaxial Vapor Recovery Adapter

EBW’s coaxial vapor recovery adapter provides an inexpensive way to convert conventional underground storage tank fill risers to coaxial vapor recovery for Stage I vapor recovery requirements. When used in conjunction with EBW’s coaxial drop tubes, the design of the coaxial vapor recovery adapters allows for product to flow through the center while vapors escape around the edge of the drop tube back to the delivery truck

CAPS

304-200-01     4” (ORANGE)

304-301-01     4” (ORANGE) ALUMINUM

777-111-01 REPLACEMENT GASKET FOR 304-200-01

950-215-01 REPLACEMENT GASKET FOR 304-301-01

CLICK PHOTO FOR WEB PAGE
0304vaporcap.jpg

Model 304
Vapor Recovery Cap

The vapor cap secures on the vapor check valve preventing dust and debris buildup and protects the vapor poppet of a dual point fill system. Orange in color to indicate vapor recovery lines and lockable to prevent misuse, our vapor cap fits all 4” male quick couplings and the cam action creates a solid push down and pull up movement for fast, easy removal and replacement of cap.

BACK TO UNDERGROUND STORAGE TANK EQUIPMENT