|
|
Aluminum T-style Vent used primarily on small fuel oil storage tanks. Outlet ports on either
side of the inlet with 20 mesh stainless steel screen keeps debris out of the airway
|
|
|
Loose-seal style cap with hinged cover. For fill port of small storage tanks. Lockable with
a padlock. Aluminum or cast iron. Available with male or female threads.
|
|
235
Gate Valve
(without expansion relief)
|
Rising Stem Gate Valve used for manual flow control in petro-chemical liquid handling. Available
in brass and ductile iron. This gate valve operates by rotating handwheel counter-clockwise to open or clockwise to close.
Valve can be left partially open to control flow rate.
CLICK HERE TO VIEW 234/235 SPEC SHEET
|
|
|
*Available in 2", 3",4", 6", 8" & 10"
Emergency Vent (pressure relief only) used on aboveground storage tanks, as a code requirement,
to help prevent the tank from becoming over-pressurized and rupturing if exposed to fire. Series also contains flanged adaptor,
companion flange, and pipe nipple fittings.
244 EMERGENCY VENTS COMPLETE LISTING
|
|
|
Installed on aboveground storage tanks for the purpose of containing small spills and drips
from the fill nozzle. Steel construction, lockable, and powder coated white.
CLICK HERE TO VIEW 515 SPEC SHEET
|
|
|
Installed on aboveground storage tanks for the purpose of containing small spills and drips
from the fill nozzle. Steel construction, lockable, and powder coated white.
CLICK HERE TO VIEW 517/518 SPEC SHEET
|
|
|
CLICK HERE TO WATCH VIDEO OF 539 DIFFUSER IN ACTION
Reduces turbulence of fuel in storage tanks, thus minimizing vapor creation. Reduces fuel
contamination by directing flow away from debris on tank bottom. Saves on both fluid vaporization and wear and tear of tanks.
Does not restrict flow of liquid into tank. Easily assembles to standard aluminum drop tube with screws or threaded pipe attachment.
Variety of models available for both AST and UST applications
CLICK HERE TO VIEW 539 SPEC SHEET
|
|
|
Ball valve type (quarter turn) brass barrel faucet. Used on barrels and small utility tanks
for low pressure or gravity flow operation. Lockable with a padlock. Straight or faucet styles.
|
|
|
For measuring liquid level in aboveground storage tanks. Gauge mounts on top of tank and
is activated by a float connected to cable. Readout is on a 12-hour clock face. Patent 5144836
CLICK HERE TO VIEW 818 SPEC SHEET
|
|
|
Utilizes the Fig. 818 style Clock Gauge with a built-in high level warning alarm. Contains
a battery powered, intrinsically safe, alarm unit that is mounted remote from gauge. Alarm is set for desired level during
installation and can be reset at any time for a change in alarm level requirements
CLICK HERE TO VIEW 918 SPEC SHEET
|
|
| CLICK PHOTO FOR LARGER IMAGE |
|
|
The 918 TCP provides an audible alarm for either a high or low level
warning. The system incorporates an alarm box and a single-point level sensor. The alarm box is UL Listed.
The alarm box is a weatherproof, intrinsically safe,
90 decibel alarm that operates on two 9-volt batteries. It features a membrane-type test/cancel button.
The single point level sensor is designed for
tanks up to 35’ tall. This rugged sensor is immersed in the tank through a 2" NPT female opening and is supported by
a nylon liquid tight fitting, Teflon tubing and wire. The float and weight are stainless steel, making it ideal for almost
any petroleum tank application.
The order length should be equal to the distance from
the top of the 2" tank opening to the desired activation level.
CLICK HERE TO VIEW 918TCP SPEC SHEET
|
|
|
This innovative product is for use on aboveground storage tanks and combines a pressure/vacuum
vent and overfill alarm all in one unit.
CLICK HERE TO VIEW 922 SPEC SHEET
|
|
926
Dry Disconnect Adaptor
|
Used to prevent product spill on a system where operation involves hook-up and disconnect.
Bayonet style mount. compatible with other brands of bayonet style dry disconnects. Brass body, Buna-N seal. Viton(R) is available.
*Viton(R) is a registered trademark of Dupont Dow Elastomers
|
